Products
Ircam Trax v3
Next Generation Voice and Sonic Processing Tools
Mode (Transformer)
Source (Transformer)
Target (Transformer)
Remix (Transformer)
Options (Transformer)
Modulations (Transformer)
Spectral Envelope (Transformer)
Filters (Transformer)
Input/Output Section (Transformer)
Options (Cross Synthesis)
Amplitude (Cross Synthesis)
Frequency (Cross Synthesis)
Options (Source Filter)
Temporal Envelope (Source Filter)
Spectral Envelope (Source Filter)
Preset/Parameter slots (All).
Parameter Morphing Slider with Automation (All).

 
 

TRAX v3- The Next Generation Voice and Sonic Processing Tools.
[ AU 32 & 64 bit | VST 32 & 64 bit | AAX Native/AudioSuite 32 & 64 bit* ]

 

A suite of no less than three ingenious processors using advanced technology, developed during the last decades, by the sound analysis/synthesis team at IRCAM. These precision tools provide truly innovative signal transformation algorithms allowing the user to alter sound characteristics such as; pitch, timbre and duration, using a highly intuitive user interface.

 

 

Transformer - Real-time Voice and Sonic Modelling Processor

TRAX Transformer v3 is based on an augmented phase vocoder technology and a cutting edge transformation algorithm, allowing for manipulating characteristic properties of a voice such as gender, age and breath, and on any other sound; expression, formant and pitch.

 

These voice transformation algorithms have already been used, with great success, in international and French cinema productions. (Farinelli, Vatel, Tirésia, Les amours d'Astrée and Céladon).

 

 

Cross Synthesis - Spectral Envelope Morphing Processor

TRAX Cross Synthesis v3 utilizes a phase vocoder (the amplitude and the frequency/phase spectra), to morph the spectral characteristics of two sounds. The amplitude and frequency/phase spectra can be blended continuously and since the features that are used here are strongly nonlinear, the sound morphing is nonlinear as well, offering a way to create a wide range of new exciting and unusual sound effects.

 

 

Source Filter - Enhanced Sound Filtering

TRAX Source Filter v3 is based on a signal model decomposing the signal into a time envelope describing the energy/loudness contour of the sound, and a spectral envelope describing the spectral colour of the sound timbre. The energy contour and the spectral colour of the source sound, can be continuously blended with the spectral colour and energy contour of an arbitrary filtrating sound, allowing transformation that extend well beyond the more common source filter morphing effect.

 

 

* TRAX v3 AAX Native & AAX AudioSuite supports 32 bit in Pro Tools 10.3.5 and 64 bit in Pro Tools 11.

 

 


 

Reviews

 

Ircam Trax v3 Reviews

 

 

For the full feature set, hover your mouse over the small images to the right above.

 

Signal Processing Features

  • Input/Output gain controls for adjusting the levels before and after processing.
  • Dry Mix control (Dry/Wet with gain compensation) allowing for parallel processing or for blending some of the original "peak" into the processed signal.*
  • Bypass routes the incoming signal direct to the output for a true smooth transition between processed and clean signal.

 

*TRAX Transformer only

 

Preset and Parameter Handling

 

Preset/Parameter slots

To enhance the workflow the two Preset/Parameter slots, A and B, can be loaded with two full set of parameters at the same time. Apart from saving each preset, a "Global Preset" containing both the A and B settings, and the position of the "Morphing Slider", can be saved.

 

Parameter Morphing Slider with Automation

The Morphing Slider provides morphing between the parameter settings of slot A/B allowing for really creative and useful real-time tweaking. Enabling the Automation control button exposes the Morphing Slider to the host automation.

Availability

The Ircam Trax v3 plug-ins are available in the following configurations:

  • Native - AU / VST / AAX Native / AAX AudioSuite

 

Processing Specifications

The TRAX v3 plug-ins, as all Flux:: plug-ins, provide

  • Up to 8 channels Input/Output.*
  • 64-bits internal floating point processing.
  • Sampling rate up to 384 kHz DXD (Pyramix DSP based).
  • Sampling rate up to 192 kHz for Native (AU/VST/AAX/AAX AudioSuite).

 

*Due to the nature of TRAX Cross Synthesis and Source Filter, they only support 2 channels Input/Output.

 

Compatibility

All major native formats are supported

  • Windows - 7 SP1, 8, 8,1 and 10 all in both 32 and 64 bits*.
    • VST (2.4)
    • AAX Native*
    • AAX AudioSuite*
  • Mac OS X (Intel) - 10.7.5, 10.8.5, 10.9.5, 10.10.5 and 10.11.5 in both 32 and 64 bits*.
    • VST (2.4)
    • AU
    • AAX Native*
    • AAX AudioSuite*

 

 

* The TRAX v3 AAX Native & AAX AudioSuite plug-ins supports 32 bit in Pro Tools 10.3.5 and 64 bit in Pro Tools 11.

 

Due to AVID ProTools changing to AAX, from Version 3 (v3) RTAS for AVID ProTools is no longer supported.

 

Hardware Requirements

A graphic card fully supporting OpenGL 2.0 is required.
 

  • Mac OS X: OpenGL 2.0 required - Mac Pro 1.1 & Mac Pro 2.1 are not supported.
  • Windows: If your computer has an ATi or NVidia graphics card, please assure the latest graphic drivers from the ATi or NVidia website are installed.

 

Software Licence Requirements

In order to use the software one of the following alternatives is required

  • An iLok.com user account (the iLok USB Smart Key is not required).
  • A Flux:: USB Dongle (Available in our online store).